Skip to content
🍁 FREE Canada Wide Shipping on all orders over $300 📦
🍁 FREE Canada Wide Shipping on all orders over $300 📦
Farrow & Ball | Wall & Ceiling Primer & Undercoat

Farrow & Ball | Wall & Ceiling Primer & Undercoat

by Farrow & Ball
SKU
$43.00 - $87.00
$43.00
$43.00 - $87.00
$43.00
Water based primer & undercoat For interior walls & ceilings For use under Estate Emulsion, Dead Flat & Modern Emulsion Available in four tone options Low VOC (1 g/L) 750 ml size available
Summary
Farrow & Ball Wall & Ceiling Primer & Undercoat is a water based primer formulated for use beneath Estate Emulsion, Dead Flat, and Modern Emulsion. It provides a solid, even base to support adhesion, even absorption, and colour depth prior to applying topcoats.
Key Features
  • Designed for specific topcoats: Intended for use under Estate Emulsion, Dead Flat and Modern Emulsion.
  • Tone options: Available in White & Light Tones, Mid Tones, Red & Warm Tones, and Dark Tones to suit the chosen topcoat colour.
  • Water based: Low odour, low VOC, and quick drying under normal conditions.
  • Surface sealing: Helps seal the surface and supports even absorption for a smoother, more even finish.
Ideal For / Applications
Interior walls
Interior ceilings
Previously painted walls (sound, clean, dry surfaces)
Under Estate Emulsion
Under Dead Flat
Under Modern Emulsion
Technical Specifications
Product Type
Primer & undercoat (water based)
Binder
Acrylic
Available Size
750 ml
Tone Options
White & Light Tones; Mid Tones; Red & Warm Tones; Dark Tones
Coverage (per coat)
Up to 480 ft² per US gallon
Dry Time
Dry in 2 hours
Recoat Time
Recoat after 4 hours
Recommended Coats
1 coat
VOC
1 g/L (Low)
Application Temperature
Do not paint below 10°C or above 30°C
Substrate pH
Up to 10
Application Humidity
< 80% RH
Density
1.2 - 1.4 g/cc
Wet Film Thickness
80 - 120 µm
Substrate Moisture (plaster walls & ceilings)
< 0.5%
Surface Preparation & Application
  • Ensure surfaces are in a sound condition, clean, dry, and free from surface contamination such as dirt, dust, grease, mould, and loose/friable material.
  • Lightly sand to create slight texture for adhesion, then remove dust.
  • Stir thoroughly before use.
  • Apply one full, solid coat of Wall & Ceiling Primer & Undercoat (or a mist coat, where applicable) before applying the topcoat.
  • Allow a minimum of 4 hours drying time between coats.
  • Do not over dilute; over dilution can reduce opacity and affect colour development.
FAQs (Quick Answers)
  • Which Farrow & Ball finishes is this designed to be used under?
    It is designed for use under Estate Emulsion, Dead Flat, and Modern Emulsion.
  • How many coats are recommended?
    The product sheet recommends 1 coat of primer & undercoat, then two coats of the chosen topcoat.
  • Is it suitable for basements or buildings without a damp-proof course?
    No. It is not suitable for basements or buildings without a functioning damp-proof course and membrane due to risk of failure (including flaking, peeling, or blistering).
  • What tone options are available?
    White & Light Tones, Mid Tones, Red & Warm Tones, and Dark Tones.
  • What is the typical recoat time?
    Typical recoat time is 4 hours under normal conditions.