Rosco FlexBond provides a flexible adhesive bond between a wide range of scenic materials—including fabrics, plastics, foams, and wood. It dries to a clear, hard, yet pliable coating that avoids the tackiness found in many other flexible glues, even after prolonged drying times. Unlike ordinary white glues that may crack or break when flexed, FlexBond maintains a strong and pliable adhesive bond as materials bend and deform. This water‐based adhesive emits little fume, making it ideal for stage and scenic applications.

Use FlexBond to bond a variety of materials:

• Fabrics to fabrics or fabrics to wood
• Foam to wood or fabric
• Laminating blocks of foam together
• Coating over Ethafoam™ to prepare surfaces for painting
• As an additive in water-based coatings (such as plaster or clay) for enhanced flexibility and adhesion

Apply Rosco FlexBond using a brush, roller, or spray gun. Ensure all surfaces are clean, dry, and free of dirt or grease. When bonding vinyls or plastics, clean the surface with denatured alcohol to remove any excess plasticiser that could interfere with proper adhesion.

FlexBond is compatible with most water-based coatings and can be easily painted or tinted using Supersaturated Roscopaint, Off Broadway, latex paints, or other colorants. Always stir before using and avoid shaking the container to prevent bubble formation. While it works best undiluted on both porous and non-porous surfaces, FlexBond may be thinned with water if a thinner, more flowing application is desired.

• Color: Off-white, matte finish
• Coverage: Approximately 250 sq. ft. per gallon (23 sq. m. per 3.79L)
• Film Thickness: 1 mil dry film (when used undiluted)
• Dry Time: Sets in 30-45 minutes; full cure within 7 days
• Clean-Up: Soap and water
• Shelf Life: Minimum 24 months
• Packaging: Available in 1 Gallon Jugs and 5 Gallon Pails (3.79L and 18.95L)

• Do not apply when surface or air temperature is below 50°F (10°C).
• Protect against freezing.
• Avoid prolonged contact with skin or inhaling spray.
• Do not ingest. KEEP OUT OF REACH OF CHILDREN.
• Use with adequate ventilation.

For the Technical Data Sheet (TDS), Safety Data Sheet (SDS), and additional product resources, please visit: Rosco FlexBond Resources