Romabio | Classic Limewash

Romabio Classico Limewash is an authentic, mineral-based lime paint handcrafted in Italy using aged slaked Dolomite lime. Designed for brick, stone, and other absorbent masonry surfaces, it creates the timeless whitewashed appearance seen throughout Europe with just one coat. Unlike traditional acrylic paint, Classico Limewash penetrates the masonry surface, allowing it to breathe while developing a rich, natural patina that softens beautifully over time.

Ideal for both interior and exterior applications, this zero VOC limewash delivers old-world character, breathable durability, and a uniquely customizable distressed finish.

• Creates an authentic European limewash finish with natural movement and depth.
• One-coat application for fast, dramatic transformations.
• Customizable distressing effect using water, brushing, or wiping techniques.
• 97% natural mineral formula made with aged slaked Dolomite lime.
• Zero VOC and toxin-free for safer indoor and outdoor use.
• Breathable finish allows masonry to naturally release moisture.
• Will not chip, peel, or flake like conventional acrylic paints.
• Naturally patinas and softens over time for an aged architectural look.

Container Size	Approximate Coverage
1 L / 1 QT	80-100 sq ft
2.5 L / 0.67 GAL	200-250 sq ft
15 L / 4 GAL	1200-1500 sq ft

Coverage estimates based on one coat at 50%-100% dilution depending on surface texture and porosity.

1. Prep Surface: Ensure masonry is clean, absorbent, and slightly damp before application.
2. Dilute & Mix: Mix thoroughly and dilute with 50%-100% water depending on desired opacity and movement.
3. Apply: Brush, roll, or spray evenly from top to bottom using generous coverage.
4. Distress (Optional): Mist with water or wipe areas while drying to expose more of the underlying masonry.
5. Protect: Use Romabio Mineral Shield in moisture-prone or high-contact areas if desired.

Dry Time: Touch dry in approximately 10-60 minutes. Full cure develops within 20-25 days.

• What makes limewash different from regular paint?
  Limewash penetrates into masonry surfaces rather than sitting on top like acrylic paint, creating a breathable, natural mineral finish.
• Can I use Classico Limewash indoors?
  Yes. It is safe for both interior and exterior masonry applications.
• Does it need a primer?
  No primer is typically required on raw, absorbent masonry surfaces.
• Will the finish change over time?
  Yes. The authentic limewash finish naturally patinas and softens with age for added depth and character.
• Can I create a distressed or antique effect?
  Absolutely. The finish can be distressed during drying using water, wiping, or brushing techniques.
• Does it peel or flake?
  No. Unlike traditional acrylic coatings, limewash bonds into masonry surfaces and will not peel or flake when properly applied.

Technical Data Sheet (TDS)
Safety Data Sheet (SDS)