Skip to content
🍁 FREE Canada Wide Shipping on all orders over $300 📦
🍁 FREE Canada Wide Shipping on all orders over $300 📦

Romabio EcoForte® Consolidator - 1L

by Romabio
SKU
Original price $175.00 - Original price $175.00
Original price
$175.00
$175.00 - $175.00
Current price $175.00
Deep-penetrating consolidator Equalizes absorption Mineral system primer Highly breathable Ultra-low VOC Non-toxic & odor-free
Why You’ll Love It
  • Deep-penetrating consolidator that equalizes absorption on porous surfaces to prevent patchy curing, discoloration, and sheen variation.
  • Required primer / sealer before potassium-silicate or slaked-lime paints and plasters on virgin portland-cement masonry.
  • Breathable formulation that supports durable mineral systems.
  • Ultra-low VOC and 0 % APEO, PEG, PG, formaldehyde, and biocides — completely non-toxic.
  • Zero-odor, water-based, made from over 75 % natural raw materials.
  • Clear flat finish that can be lightly tinted to show coverage.
Ideal Uses & Compatible Surfaces

Perfect for interior or exterior use on virgin drywall / gypsum board, portland-cement stucco, concrete block, reinforced concrete, MGO board, chalky paints, plasters, and lime-based finishes.

Also great as a fixative on low-fired / porous brick and as an isolator to reduce salt or efflorescence reactions.

Technical Highlights
Type
Consolidator & binder-assist primer (water-based)
Finish / Color
Clear, flat
VOC
Ultra-low
pH
Alkaline formulation
Vapor Permeability
Highly breathable

Not designed as a mold-resistant topcoat; pair with appropriate mineral system for exterior use.

How to Apply
  1. Dilute 1 : 1 with water and mix well.
  2. Apply one uniform coat by brush, roller, or sprayer to a clean, dry surface.
  3. On new drywall, a second wet-on-damp coat may be required over patched or non-paper areas.
  4. Avoid over-priming. Once dry, the surface should remain flat and non-sheened.
  5. Allow 8 – 12 hours of drying before applying MicroGrip primer or other mineral/lime finishes.
Dry Time & Clean-Up
  • Dry to recoat: 8 – 12 hours (allow longer in cool / humid conditions).
  • Application temperature: 46 – 90 °F (8 – 32 °C).
  • Clean tools with water and mild detergent.
System Guidance
  • New cement / stucco: Cure 21 – 28 days → EcoForte Consolidator → MicroGrip primer → finish.
  • Chalky acrylics: Pressure-wash → Consolidator → MicroGrip primer.
  • Salt / coastal areas: Neutralize salts, rinse, dry → EcoForte Consolidator → finish system.
  • Low-fired brick: Consolidate → EcoForte Consolidator → MicroGrip → finish.
Health & Sustainability