Romabio | Lime Slurry

Romabio Lime Slurry is a concentrated, mineral-based lime finish designed to give brick, stone, and masonry surfaces a textured, plaster-like appearance with beautiful Old-World character. Inspired by traditional European finishes, Lime Slurry creates a velvety matte surface that hardens like plaster while remaining breathable and durable.

Ideal for both interior and exterior masonry, this zero VOC formula is made with 95% natural materials and is built to bond into absorbent mineral surfaces without peeling or flaking when properly applied.

• Creates an authentic European lime finish with soft texture and visual depth.
• Produces a matte, plaster-like look similar to stucco or traditional lime coatings.
• Hardens like plaster while applying with a masonry brush.
• Breathable mineral finish allows moisture to escape from masonry surfaces.
• Concentrated formula dilutes with water for excellent coverage.
• Zero VOC and environmentally friendly for interior and exterior use.
• Made with 95% natural materials.
• Designed to resist peeling and flaking when applied to suitable surfaces.

Container Size	Approximate Coverage
2.5 L / 0.67 GAL	90-100 sq ft
15 L / 4 GAL	540-600 sq ft

Coverage may vary depending on surface texture, porosity, dilution, and application method.

1. Prep Surface: Ensure the surface is clean, sound, absorbent, and suitable for mineral coatings.
2. Dampen Surface: Dampen the wall before each coat. The surface should be wet, but not dripping.
3. Dilute First Coat: Mix thoroughly and dilute the first coat with approximately 5%-8% water.
4. Apply First Coat: Apply using the Romabio Large Masonry Brush.
5. Dilute Second Coat: Dilute the second coat with approximately 5% water.
6. Apply Second Coat: Brush apply evenly to build the desired texture and coverage.
7. Optional Third Coat: Apply a third coat if a thicker fill or richer texture is desired.

Important: Lime Slurry is not recommended for roller or sprayer application. Brush application is required for best results.

• What does Romabio Lime Slurry look like?
  It creates a matte, textured, plaster-like finish with an authentic Old-World lime appearance.
• Is Lime Slurry the same as Classico Limewash?
  No. Lime Slurry creates a thicker, more textured plaster-like finish, while Classico Limewash creates a softer, washed mineral finish.
• Can I use Lime Slurry indoors?
  Yes. It can be used on suitable interior masonry surfaces such as brick walls, fireplaces, and feature walls.
• Can I use Lime Slurry outside?
  Yes. It is designed for both interior and exterior masonry applications.
• Can I roll or spray Lime Slurry?
  No. Lime Slurry should be applied by brush only for proper texture and performance.
• How many coats do I need?
  Two coats are recommended. A third coat can be added for a thicker fill or richer texture.
• Does it peel or flake?
  When applied correctly to a suitable surface, Lime Slurry bonds into masonry and is designed not to peel or flake like conventional acrylic paint.

Romabio Product Resources
Romabio Large Masonry Brush