Benjamin Moore | Drywall Primer

Benjamin Moore® Drywall Primer K265 is a professional, acrylic primer designed for interior drywall and plaster surfaces. It delivers high hiding, excellent sealing and holdout, and a uniform surface for topcoats, helping achieve a consistent, high-quality finish in both residential and commercial spaces. Its quick-drying, low-VOC formula supports fast project turnaround without sacrificing performance.

• High hiding helps reduce the number of finish coats.
• Excellent sealing & holdout promotes uniform sheen and color.
• Fast drying — ready to recoat in approximately 2 hours.
• Designed specifically for new or previously painted drywall and plaster.
• Low-VOC formulation supports healthier indoor environments.
• Compatible with a wide range of Benjamin Moore® interior finishes.

• Surfaces must be clean, dry, and free of dust, grease, oil, soap, wax, and mildew.
• Remove peeling or scaling paint and sand to feather edges smooth.
• Dull glossy surfaces to improve adhesion.
• Drywall must be free of sanding dust before priming.
• Allow new plaster or masonry to cure for 30–60 days before priming.

• Stir thoroughly before and during use.
• Apply one or two coats as needed.
• Apply by brush, roller, or airless spray.
• Use premium-quality nylon/polyester brushes and rollers for best results.
• For best hiding, tint primer toward the finish coat color.

• What is K265 used for?
  It’s designed to prime interior drywall and plaster, providing sealing and holdout for a uniform finish.
• Is this primer suitable for exterior use?
  No. K265 is intended for interior use only.
• How long before I can paint over it?
  You can typically recoat in about 2 hours under normal conditions.
• Does it help with sheen uniformity?
  Yes. Its excellent holdout properties help prevent flashing and uneven sheen.