Famowood Natural Latex Wood Filler

Famowood Latex Wood Filler is a versatile, easy-to-use wood repair compound designed to fill cracks, holes, and defects in wood surfaces. Its smooth-spreading formula bonds firmly and dries quickly, allowing for fast sanding and finishing. Engineered to behave like real wood, it can be drilled, nailed, planed, or sawed once cured. It accepts paint and stain evenly, making it ideal for both repair work and custom finishing projects.

• Fills small and large cracks, holes, and imperfections in wood.
• Latex-based formula with low odor and easy water clean-up.
• Spreads smoothly without shrinking, cracking, or crumbling.
• Requires minimal sanding for a smooth finish.
• Can be cut, drilled, nailed, or sanded like real wood.
• Accepts paint and stain evenly for seamless repairs.

• Ensure cracks or defects are clean and dry before application.
• Do not apply below 4 °C (40 °F).
• Press filler firmly into defect using hand or putty knife.
• Thin layers dry within minutes; thicker repairs require more time.
• For deep repairs, allow each layer to dry before applying additional coats.
• Once dry (approx. 30 minutes), sand flush with surrounding surface.
• Surface can then be painted, stained, varnished, waxed, or sealed.
• Always test stain compatibility before full application.

• Clean tools while wet using water or soap and water.
• For dried product, use solvent or steam.
• Keep container tightly sealed after each use.
• Avoid freezing when possible; product can be restored after limited freeze cycles.

• Can this be stained?
  Yes, it accepts stain well, but always test first for colour matching.
• Can it be used outdoors?
  Yes, it is suitable for interior and exterior wood repairs.
• Does it shrink or crack?
  No, it is formulated to resist shrinking, cracking, and crumbling.
• What if it dries out in the container?
  Add a small amount of warm water and knead to restore consistency.
• Can it be worked like wood?
  Yes. Once dry, it can be sawed, drilled, nailed, or sanded.